# AS/NZS 5139:2019: Electrical installations: safety of battery systems for use with power conversion equipment

> AS/NZS 5139:2019 sets installation requirements for battery systems connected to inverters in Australia and New Zealand, including where lithium batteries may and may not be located.

Source: https://batteryfirebreak.com/standards/as-nzs-5139/
Updated: 2026-11-15
Publisher: Battery Firebreak. Licence: CC BY 4.0.

AS/NZS 5139:2019 is the Australian and New Zealand standard for installing battery systems that work with inverters, such as home solar batteries. It mainly controls where and how a battery may be installed: location restrictions, clearances, barriers to habitable rooms, signage and isolation. It is an installation standard, not a product test standard; battery products are assessed separately.

## What it covers

- Location rules for battery systems, including places where they must not be installed, such as escape routes and certain living areas.
- Separation and barrier requirements between a battery and habitable rooms.
- Ventilation, clearances, labelling and isolation requirements.
- A risk-based approach that depends on the battery chemistry and its hazards.

## Why it matters for barrier materials

Where a battery is installed close to a habitable room, the wall or barrier between them must meet the standard's requirements. Products that pass stricter product-level fire tests can give installers more options. This makes Australian home-battery makers and installers a potential audience for barrier and fire-protection materials.

## Status

AS/NZS 5139 has been under review. Before relying on any detail on this page, check the current edition and any amendments on the Standards Australia store.

## Sources


- Standards Australia store, AS/NZS 5139:2019: store.standards.org.au <https://store.standards.org.au/> (search "5139")
- Clean Energy Council, battery installation guidance: cleanenergycouncil.org.au <https://www.cleanenergycouncil.org.au/>
